Miele KM 7464 FL - System and Safety Locks

Operation
48
System lock
Activating the system lock
All sensor controls are locked. A set
minute minder time will continue to
count down.
 Touch the sensor control for
6seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed, will appear in the
timer display. The system lock is
activated.
If a disallowed sensor control is
touched whilst the system lock is
activated,  will appear in the timer
display for a few seconds and a buzzer
will sound.
The system lock can be programmed
to be activated automatically
5minutes after the hob has been
switched off (see “Adjusting settings”).
Deactivating the system lock
 Touch the sensor control for
6seconds.
will appear briefly in the timer
display and then the seconds will count
down. The system lock is deactivated
once the time has elapsed.
Safety lock
Activating the safety lock
When the safety lock is activated:
- The cooking zones and the hob can
only be switched off
- A set minute minder time can be
modified
 Touch and hold the + and sensor
controls at the same time for
6seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed, will appear in the
timer display. The lock function is
activated.
If a disallowed sensor control is
touched while the safety lock is
activated, will appear in the timer
display for few seconds and a buzzer
will sound.
Deactivating the safety lock
 Touch and hold the + and sensor
controls at the same time for
6seconds.
will appear briefly in the timer
display and then the seconds will count
down. Once the time has elapsed, the
safety lock function is deactivated.