Miele KM 7464 FL - Adjusting Settings; Accessing and Setting Programmes

Adjusting settings
55
Accessing programming mode
The hob is switched off.
 Touch and hold the  and sensor
controls until the + sensor control
lights up and appears in the timer
display.
After a few seconds :(Programme
01) will flash alternately with :(Code)
in the timer display.
Setting a programme
 Whilst the programme is visible in the
display (e.g.:), touch the + sensor
control repeatedly until the number of
the programme you want appears in
the display.
Setting the code
 Whilst the code is visible in the
display (e.g.:), touch the + sensor
control repeatedly until the number of
the code you want appears in the
display.
Saving the settings
 Whilst the programme is visible in the
display (e.g.:), touch the
sensor control until the displays
go out.
To avoid saving the settings
 Touch the sensor control until the
displays go out.