Troubleshooting
63
Problem Cause and remedy
A cooking zone or the
whole hob switches off
automatically.
The overheating protection mechanism has been
activated.
Allow the hob to cool down.
Rectify the causes of the overheating (see
“Familiarisation – Overheating protection”).
Check that the hob is working.
If the problem occurs again, contact the Customer
Service Department.
The Booster level has
deactivated early auto-
matically.
The overheating protection mechanism has been
activated.
Allow the hob to cool down.
Rectify the causes of the overheating (see
“Familiarisation – Overheating protection”).
Check that the hob is working.
If the problem occurs again, contact the Customer
Service Department.
To Next Page
Loading...
