Miele Oven - Steam and Demo Mode Issues

Problem Possible cause and remedy
The message "Function
currently not available"
appears in the display
after selecting the
"Descale" function.
The steam injection system is faulty.
^
Call the Miele Service Department.
The message "Fault with
moisture control - the
automatic programmes
will operate without
moisture" appears in the
display after selecting
an Automatic
programme.
The steam injection system is faulty.
^
Call the Miele Service Department.
Automatic programmes can be run without using
moisture.
After selecting the
Moisture plus d
function "Fault with
moisture control -
Moisture plus
programme not
available" appears in
the display.
The steam injection system is faulty.
^ Call the Miele Service Department.
^ Use the Fan plus U function instead of the Moisture
plus d function.
Programmes using
moisture will not take in
water.
^ Check whether "On" has been selected for demo
mode (see "Settings - Showroom programme").
The oven can be used in demo mode but the pump for
the steam injection system will not work.
^
Deactivate demo mode.
A noise can be heard
after a cooking process.
The fan remains switched on after a cooking
programme (see "Settings - Cooling fan run-on").
Problem solving guide
134