Important notes about using
the food probe
,
To ensure the probe works
correctly, please observe the
following instructions.
–
Do not use deep, narrow, metal
cooking containers, as these will
weaken the radio signal.
–
Do not place any metal items above
the food probe, such as lids,
aluminium foil, racks or universal
trays on a shelf level above the food
with the food probe. Glass lids may
be used.
– Do not use another standard metal
cooking thermometer at the same
time.
– Do not allow the handle of the food
probe to sit in any sauce or cooking
liquid, or to rest on the food or on the
edge of the cooking container.
Do not use the food probe to lift or
carry the food. Danger of breaking.
In addition please note:
–
You can place the meat in a pot or
on the rack in the universal tray.
–
The metal tip of the food probe must
be fully inserted into the centre of the
food. The handle should be angled
upwards towards the corners or the
door of the oven. Make sure it is not
horizontal.
–
When cooking poultry, insert the
metal tip into the thickest part of the
breast. You can find the thickest part
of the breast by pressing the area
with your thumb and index finger.
– Do not let the metal tip touch any
bones or insert it into a particularly
fatty area of the meat. If fat or bone
come into contact with the probe,
this can lead to the oven being
switched off too early.
– If the meat is very heavily marbled
with fat, select the highest core
temperature given in the Roasting
chart.
Roasting
88
To Next Page
Loading...
Need help?
General
