Problem solving guide
38
Possible reasons for increased levels of foaming
Problem Possible cause and remedy
Excessive foaming during
the wash cycle.
You are using an unsuitable detergent.
Only use detergent formulated for use in commercial
washing machines. Domestic laundry detergent is not
suitable.
You are using too much detergent.
Dispense detergent following the instructions on the
packaging and in accordance with local water hardness
levels.
You are using very soft water.
In areas with water hardness level1, add less detergent
in accordance with the detergent manufacturer’s
instructions.
The items of laundry are only slightly soiled.
For lightly soiled laundry, add less detergent in
accordance with the detergent manufacturer’s
instructions.
There are residues in the laundry (e.g. from detergent).
Additionally, pre-rinse the laundry without setting a
temperature and without using detergent.
The load size is too small.
Reduce the amount of detergent.
The drum spin speed is too high during the wash cycle.
Reduce the drum spin speed and wash rhythm.
Large items stretched
Problem Possible cause and remedy
Stretching of large items
during spinning
Large items can get stretched during spinning.
This can mostly be prevented by reprogramming.
Contact Miele Professional Service.
Continuing a programme after an interruption to the power supply
If a running programme is interrupted, e.g. by a power cut, the programme can be
continued when power is restored.
Switch on the washing machine with the button.
Then press "START".
The programme will then continue with the next programme stage.
To Next Page
Loading...
Need help?
General
