Installation
42
Installing the washing machine
The washing machine must be installed by a Miele authorised
installer. Please observe the instructions in the installation plan.
This washing machine is only intended for items of laundry that
have not been proofed with dangerous or inflammable substances.
To avoid the risk of frost damage, the machine must not be located
in rooms which may be subject to very low temperatures.
Transport the machine on a pallet jack inside the room.
Machines with machine feet must not be slid along the floor.
This could damage the machine feet.
Remove the packaging carefully with a suitable tool.
Lift the machine off the pallet using a lifting device.
Securing the machine
The feet of the washing machine must be secured to a suitable
plinth using the fixtures and fastenings supplied.
The material provided is intended for use in bolting the machine to a
concrete floor. For other types of flooring, please purchase suitable
fitting materials separately.
General operating conditions
This washing machine is intended only for use in a commercial
environment and must only be operated indoors.
Ambient temperature in installation room: 0°C to 40°C.
Relative humidity: non-condensing
Depending on the nature of the installation site, sound emissions and
vibration may occur.
Useful tip: Have the installation site inspected and seek the advice of
a professional in instances where increased noise may cause a
nuisance.
To Next Page
Loading...
