Supervisor level
55
- Switch off after 20minutes
- Switch off after 30minutes
Delay start
The Delay start (Timer) display can be switched on or off.
Factory default: On
Memory
The washing machine will save the latest settings (temperature, spin
speed and some of the options) which have been selected for a
programme after the programme has started.
When the programme is selected again, the saved settings will
appear in the display.
Factory default: Off
Temperature unit
You can select the unit for the temperature display.
Factory default: °C/Celsius
Weight unit
You can decide whether load sizes are displayed in “kg” or “lbs”.
You can also switch this information off altogether.
Factory default: kg
You can change the Supervisor level access code to protect the
washing machine from unauthorised access.
Enter the current code.
Then enter your new code.
To Next Page
Loading...
Need help?
General
