Supervisor level
57
Programme
packages
The selection of programmes can be expanded by activating single
programmes from the target group programme packages.
The programmes selected from the programme packages (marked in
orange) are displayed during programme selection.
Sort programmes
Programmes can be moved within the programme list and in the
Favourites list.
Factory default: Off
Moving
programmes
Touch the sensor control for the programme you want to move.
Press and hold the sensor until the frame changes.
Drag the programme to the required position.
Prog. colour
allocation
You can assign a colour to a Favourite programme. In the Favourites
list, each Favourite programme is given a coloured frame, which can
be adjusted.
Factory default: On
Hygiene
If a programme at a temperature below 60°C has been used, the
prompt to start the Maintenance wash hygiene programme will appear
in the display.
Factory default: Off
Expert code
A code needs to be entered to cancel a disinfection programme. The
code can be changed.
The code is: 0 0 0
Make a note of your new code if you ever change it.
To Next Page
Loading...
Need help?
General
