Changing the programme sequence
50
Changing a programme
Altering the wash
programme
Before selecting a new programme, cancel the current programme
and select a new one.
Cancelling a programme
You can cancel a programme at any time after it has started.
Touch the Start/Stop sensor.
The following will appear in the display:
Cancel the programme?
Select Yes.
The following will appear in the display:
Programme cancelled.
The suds will be pumped away.
Wait until the door unlocks.
Pull open the door.
Remove the laundry.
Switching on the washing machine after an interruption
to the power supply
If the washing machine is switched off with the button during a
wash programme, the programme will be interrupted.
Switch it back on with the button.
Note the message in the display.
Touch the Start/Stopsensor.
The programme will also be interrupted if power is interrupted by a
power cut.
When power is restored, confirm the message in the display with
OK.
Touch the Start/Stopsensor.
The programme will continue.
To Next Page
Loading...
Need help?
General
