Miele S 344i - 6.3 Poor Suction Performance

Technical Information
58
S 2xx, S 3xx & S 4xx Canister Vacuums
Figure 6-4: Modified Dustbag Holder, S 27x and S 28x
6.3 Poor Suction Performance (S 27x and S 28x)
Possible cause:
Motor seal (Figure 6-5, Item 1) has slipped.
Remedy:
1. Unscrew the mounting panel and install the motor seal holder (Figure 6-5,
Item 2), part no. 3840800, onto the mounting panel (Figure 6-5, Item 3)
from below.
2. Carry out a test run.
Figure 6-5: S 27x and S 28x Motor Seal and Holder