EasyManua.ls Logo

Miele S 8530 User Manual

Miele S 8530
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Descriptive Technical
Documentation
- Model-dependent -
DTD no. 41-8000
Model(s): S 8310, S 8330, S 8340, S 8360,
S 8390, S 8510, S 8530, S 8540,
S 8560, S 8590, S 8510 UniQ,
S 8530 UniQ, S 8540 UniQ,
S 8560 UniQ, S 8590 UniQ, S 8710,
S 8730, S 8790, S 8930, S 8960
07.06.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Question and Answer IconNeed help?

Do you have a question about the Miele S 8530 and is the answer not in the manual?

Miele S 8530 Specifications

General IconGeneral
ModelS 8530
CategoryVacuum Cleaner
TypeCanister
Dust Bag Capacity4.5 l
Operating Radius12 m
Filtration SystemAirClean filter

Summary

A Warning and Safety Instructions

General Safety and Repair Guidelines

General safety and repair guidelines for trained technicians, adhering to regulations.

010 Base

Caster and Parking Slot Removal

Instructions for removing caster wheels and parking slots using tools.

020 Cover Frame

Bag Holder Replacement Procedure

Steps to carefully remove and replace the bag holder by unsnapping.

Cover Frame Removal Steps

Detailed instructions to remove the cover frame, including seals, filters, and screws.

030 Dust Compartment Lid

Accessory and Dust Compartment Lid Removal

Instructions for removing the accessory lid and the main dust compartment lid.

Fault Repair: Motor Performance Issues

Motor Does Not React or Runs at High Speed

Diagnoses causes like clogged channels or damaged hoses for motor performance issues.

Pressure Sensor Defect Cause

Identifies a defective pressure sensor on the electronic board as a cause.

Fault Repair: Low Suction Power

Causes for Low Suction Power

Lists causes like clogged nozzles/hoses, full dustbags, or clogged filters.

Fault Repair: Motor Does Not Run

Causes for Motor Not Running

Identifies causes such as jammed park switch, defective windings, or thermal trip.

Cause: Worn Carbon Brushes

Identifies worn carbon brushes as a cause for the motor not running.

Related product manuals