3 Fault Repair
3.1 Motor Does Not React in the "Automatic" Setting or Always Runs
at High Speed
Cause
Low-pressure channel to the bag compartment is clogged.
Remedy
x
Fig. 7
A Check the low-pressure channel in the dust compartment lid (040 Fig. 7, Pos.
1) for clogs.
Cause
The hose between the pressure sensor and the dust compartment is kinked or
damaged.
Remedy
A Cover Frame Removal, 020 4.2.
A Check the hose for damages, kinks or clogs; see 040 Fig. 5.
A If necessary, replace the hose.
Descriptive Technical Documentation
040-6 DTD no. 41-8000
This information should not be duplicated or passed on without Miele approval. All rights reserved. 07.06.2013, US_am