Condensed water container
42
Emptying the condensed water
container
The condensed water is collected in
the condensed water container.
Empty the condensed water
container after every drying program.
The Empty container See indicator will
light up if the maximum level of the
condensed water container is reached.
To turn the indicator light off: open and
close the door while the dryer is
switched on.
Remove the condensed water
container.
To prevent water running out, keep it
in a horizontal position when carrying
it. Hold it at the front and towards the
back.
Empty the condensed water
container.
Replace the condensed water
container in the dryer.
Do not drink condensed water. It
can cause health problems in people
and animals.
The condensed water can be used for
the Soft Steam program. The
condensed water container must be
filled to use this program (see the
following section).
To Next Page
Loading...
Need help?
General