Cleaning and care
53
Plinth filter
Clean the plinth filter whenever the
Clean the lint filter and the plinth filter.
See lights up or when the
program duration is longer than
usual.
To turn the indicator light off: Switch
the dryer off and then on again / if
necessary, confirm with OK.
Removing the plinth filter
Press the round, indented area on the
heat exchanger access panel to open
it.
The panel will spring open.
Pull the plinth filter out by the handle.
This causes the right-hand guide pin in
the dryer to come out. This pin ensures
that the heat exchanger access panel
can only be closed if the plinth filter is
inserted the right way round.
To Next Page
Loading...
Need help?
General