Frequently Asked Questions
64
Spray jet for the Soft Steam
program
Limescale deposits will impair the
spray jet.
In this case, the spray jet must be
removed and replaced with a new
one (see "Optional accessories").
You can only replace the spray jet
using a special tool. The special tool is
supplied with the new spray jet.
Do not use any other tools.
This would damage the spray jet or
the dryer.
The Soft Steam program must
never be used without the spray jet
fitted and screwed in correctly.
Open the door of the tumble dryer.
The spray jet is located in the top left of
the door opening.
Attach the tool to the spray jet.
Turn the tool counterclockwise to
unscrew the spray jet.
Insert the new spray jet in the tool.
Turn the tool clockwise to screw the
spray jet securely in position.
To Next Page
Loading...
Need help?
General