Installation and connection
80
Remove the lock catch from the
cover.
This lock catch cover is no longer
needed.
Insert the lock catch into the new
cover supplied with the dryer.
Place this new lock catch cover to
one side for now.
4. Dismantle the door hinge from the
door
The door hinge cover must be
unclipped from position and then
removed.
Use a screwdriver to press down
gently on position on the door
hinge cover.
Using a little force, pull out door
hinge cover .
This lock catch cover is no longer
needed.
To Next Page
Loading...
Need help?
General