Mikado LOGO 700 - 3 Main Gear Installation; Main Gear Mounting - Steps 1-3; Main Gear Mounting - Steps 4-8

1
2
3
4 5 6 7 8
Bag 4
Prior to mounting the main gear,
apply grease to both bevel
gears in the tail drive.
When mounted properly, the
main gear has approx. 1 mm
axial play.
Use the silicone tube provided as a
fl exible extension, to easily mount the
4x20 mm bolt in the tail gear.
Apply grease to the one way
bearing.
Manual LOGO 700 - ©Mikado Model Helicopters GmbH - Page 8
3 Main Gear
6x M2,5x10
14x20x0,3
M2,5x25 (4x)
M3x10
14x20x1
6x M2,5x10
1x
M3x10
4x
1x
M2,5x25
4x20
1x
1x
14x20x1
14x20x0,3
Loctite
4x20
Loctite