OM-273476 Page 10
SECTION 3 – DEFINITIONS
3-1. Additional Safety Symbol Definitions
F
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the
symbols.
OM-
1-1. Additional Safety Symbols And Definitions
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012 05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Safe37 2017 04
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe3 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe4 2017 04
Disconnect input plug or power before working on machine.
Safe5 2017 04
Keep your head out of the fumes.
Safe6 2017 04
Keep your head out of the fumes
Safe7 2017 04
Use forced ventilation or local exhaust to remove the fumes.
Safe8 2012 05
Use forced ventilation or local exhaust to remove the fumes.
Safe9 2012 05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE)
by disposing at a designated collection facility.
Contact your local recycling office or your local distributor for further
information.
OM-
1-1. Additional Safety Symbols And Definitions
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012 05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Safe37 2017 04
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe3 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe4 2017 04
Disconnect input plug or power before working on machine.
Safe5 2017 04
Keep your head out of the fumes.
Safe6 2017 04
Keep your head out of the fumes
Safe7 2017 04
Use forced ventilation or local exhaust to remove the fumes.
Safe8 2012 05
Use forced ventilation or local exhaust to remove the fumes.
Safe9 2012 05
Wear dry insulating gloves. Do not touch electrode with bare hand.
Do not wear wet or damaged gloves.
OM-
1-1. Additional Safety Symbols And Definitions
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012 05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Safe37 2017 04
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe3 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe4 2017 04
Disconnect input plug or power before working on machine.
Safe5 2017 04
Keep your head out of the fumes.
Safe6 2017 04
Keep your head out of the fumes
Safe7 2017 04
Use for
ced ventilation or local exhaust to remove the fumes.
Safe8 2012 05
Use forced
ventilation or local exhaust to remove the fumes.
Safe9 2012 05
Protect yourself from electric shock by insulating yourself from work
and ground.
OM-
1-1. Additional Safety Symbols And Definitions
S
ome
s
ymbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
S
afe1 2012
0
5
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
S
afe37 2017
0
4
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe3 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe4 2017 04
Disconnect input plug or power before working on machine.
Safe5 2017 04
Keep your head out of the fumes.
Safe6 2017 04
K
eep
y
our head out of the fumes
Safe7 2017 04
Use forced ventilation or local exhaust to remove the fumes.
Safe8 2012 05
Use forced ventilation or local exhaust to remove the fumes.
Safe9 2012 05
Disconnect input plug or power before working on machine.
OM-
1-1. Additional Saf
ety Symbols And Definitions
Some symbols are found only on CE products.
Wa
rning! Watch Out!
Th
ere are possible hazards as shown by the symbols.
Safe1 2012 05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
fa
cility.
C
ontact your local recycling office or your local distributor for further information.
Safe37 2017 04
We
ar dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017 04
Pro
tect
you
rself from electric shock by insulating yourself from work and ground.
Safe3 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe4 2017 04
Disconnect input plug or power before working on machine.
Safe5 2017 04
Keep your head out of the fumes.
Safe6 2017 04
Keep your head out of the fumes
Safe7 2017 04
Use forced ventilation or local exhaust to remove the fumes.
Safe8 2012 05
Use forced ventilation or local exhaust to remove the fumes.
Safe9 2012 05
Keep your head out of the fumes.
OM-
Safe54 2017 04
During the first 50 hours of operation keep welding load above 200
amperes. Do not weld below 200 amperes of output.
Safe55 2012 05
After the first 50 hours of operation, change the engine oil and filter.
Wear dry insulating gloves. Do not wear wet or damaged gloves.
Safe56 2017 04
Safe57 2017 04
Wear dry insulating gloves. Do not touch electrode (wire) with bare hand. Do not wear wet or damaged gloves.
Protect yourself from electric shock by insulating yourself from work and ground.
Safe58 2017 04
Keep your head out of the fumes.
Safe59 2017 04
Use forced ventilation or local exhaust to remove the fumes.
Safe60 2012 06
Use ventilating fan to remove fumes.
Safe61 2012 06
Keep flammables away from welding. Do not weld near flammables.
Safe62 2012 06
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe63 2012 06
Use forced ventilation or local exhaust to remove the fumes.
OM-
Safe54 2017 04
During the first 50 hours of operation keep welding load above 200
amperes. Do not weld below 200 amperes of output.
Safe55 2012 05
After the first 50 hours of operation, change the engine oil and filter.
Wear dry insulating gloves. Do not wear wet or damaged gloves.
Safe56 2017 04
Safe57 2017 04
Wear dry insulating gloves. Do not touch electrode (wire) with bare hand. Do not wear wet or damaged gloves.
Protect yourself from electric shock by insulating yourself from work and ground.
Safe58 2017 04
Keep your head out of the fumes.
Safe59 2017 04
Use forced ventilation or local exhaust to remove the fumes.
Safe60 2012 06
Use ventilating fan to remove fumes.
Safe61 2012 06
Keep flammables away from welding. Do not weld near flammables.
Safe62 2012 06
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe63 2012 06
Use ventilating fan to remove fumes.
OM-
Safe54 2017 04
During the first 50 hours of operation keep welding load above 200
amperes. Do not weld below 200 amperes of output.
Safe55 2012 05
After the first 50 hours of operation, change the engine oil and filter.
Wear dry insulating gloves. Do not wear wet or damaged gloves.
Safe56 2017 04
Safe57 2017 04
Wear dry insulating gloves. Do not touch electrode (wire) with bare hand. Do not wear wet or damaged gloves.
Protect yourself from electric shock by insulating yourself from work and ground.
Safe58 2017 04
Keep your head out of the fumes.
Safe59 2017 04
Use forced ventilation or local exhaust to remove the fumes.
Safe60 2012 06
Use ventilating fan to remove fumes.
Safe61 2012 06
Keep flamma
bles away from welding. Do not weld near flammables.
Safe62 2012 06
Weldin
g
sparks
can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe63 2012 06
Keep flammables away from welding. Do not weld near flammables.
To Next Page
Loading...
