OM-273476 Page 13
SECTION 4 – SPECIFICATIONS
4-1. Software Licensing Agreement
The End User License Agreement and any third-party notices and terms and conditions pertaining to third-party software can be found at
https://www.millerwelds.com/eula and are incorporated by reference herein.
4-2. Information About Default Weld Parameters And Settings
NOTICE – Each welding application is unique. Although certain Miller Electric products are designed to determine and default to certain typical
welding parameters and settings based upon specific and relatively limited application variables input by the end user, such default settings are
for reference purposes only; and final weld results can be affected by other variables and application-specific circumstances. The appropriate-
ness of all parameters and settings should be evaluated and modified by the end user as necessary based upon application-specific require-
ments. The end user is solely responsible for selection and coordination of appropriate equipment, adoption or adjustment of default weld
parameters and settings, and ultimate quality and durability of all resultant welds. Miller Electric expressly disclaims any and all implied warran-
ties including any implied warranty of fitness for a particular purpose.
4-3. Specifications
Input Power
Welding Power
Source Type
Wire Feed Speed
Range*
Wire Diameter
Range
Welding Circuit
Rating
Overall Dimen-
sions With
Spool Covers
Weight
50 VDC Continuum Series
Standard:
50-1000 ipm
(1.27-25.4 mpm)
0.035 To 5/64 in.
(0.9 To 2 mm)
NON CE
72 Volts DC
500 Amperes,
100% Duty Cycle
CE
72 Volts DC
400 Amperes,
100% Duty Cycle
Height: 9.25 in.
(235 mm)
Width: 9.45 in.
(241 mm)
Length:
13 in.(330 mm
18.5 lb
(8.41 kg)
*See Section 4–6 for detailed information on wire type, wire size and wire feed speed.
4-4. Environmental Specifications
A. IP Rating
IP Rating
IP21X
This equipment is designed for indoor use and is not intended to be used or stored outside.
B. Temperature Specifications
Operating Temperature Range* Storage/Transportation Temperature Range
14 to 104°F (-10 to 40°C) -4 to 131°F (-20 to 55°C)
*Output is derated at temperatures above 104°F (40°C).
C. Information On Electromagnetic Compatibility (EMC)
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public
low-voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations,
due to conducted as well as radiated disturbances.
D. China EEP Hazardous Substance Information
中国电器电子产品中有害物质的名称及含量
China EEP Hazardous Substance Information
部件名称
Component
Name
(如果适用)
(if applicable)
有害物质
Hazardous Substance
铅
Pb
汞
Hg
镉
Cd
六价铬
Cr6
多溴联苯
PBB
多溴二苯醚
PBDE
黄铜和铜部件
Brass and Cop-
per Parts
X O O O O O
耦合装置
Coupling Devices
X O O O O O
开关装置 O O X O O O
To Next Page
Loading...
