OM-243 762 Page 18
SECTION 5 − MAINTENANCE & TROUBLESHOOTING
5-1. Routine Maintenance
! Disconnect power
before maintaining.
. Maintain more
often during
severe conditions.
n = Check Z = Change ~ = Clean l = Replace
* To be done by Factory Authorized Service Agent
Reference
Every
3
Months
l Damaged Or Unreadable
Labels
l Repair Or Replace
Cracked Weld Cable
~ Clean And Tighten Weld
Terminals
n Check Gun Cable
l Damaged Gas Hose l Fiche a été endommagé
ou craquelée
Every
6
Months
~ Clean Drive Rolls ~ Blow Out Or Vacuum
Inside
After
Each
Spool
Of Wire
~ Gun Liner
5-2. Changing Gun Contact Tip
Ref. 243 739-B
2
1
1 Nozzle
Remove nozzle.
2 Contact Tip
Unscrew contact tip.
Install new contact tip.
Install nozzle.
Tools Needed:
To Next Page
Loading...
