Miller Titanium Series - Variable Shade Adjustment

To Next Page

To Previous Page

OM-256 016 Page 9

3-5. Variable Shade Control (Titanium 7300 And 9400 Series Helmets)

1 Variable Shade

Adjustment Buttons

2 Mode Control Button

Use the LTR and DKR ad-

justment buttons to adjust

the lens shade in the dark-

ened state. Use the table in

Section 1-4 to select proper

shade control setting based

on your welding process.

The shade ranges for each

mode are as follows:

Weld − No. 8 − No. 13

Cut − No. 5 − No. 8

Grind − No. 3 only

X Mode − No. 8 − No. 13

Start at the highest setting

and adjust lighter to suit the

application and your person-

al preference.

Variable Shade Adjust-

ment Procedure

 Press Auto On/Off but-

ton to turn lens On. Hel-

met lens will darken

twice and then clear.

 Press Mode Control

Button to select desired

function: Weld, Cut, or

X-Mode.

 Use LTR and DKR ad-

justment buttons to se-

lect desired shade.

 Begin welding or contin-

ue with other lens ad-

justments.

Other manuals for Miller Titanium Series