Miller Titanium Series - Clock Control (Titanium 7300 and 9400 Series Helmets)

OM-256 016 Page 15
3-11. Clock Control (Titanium 7300 And 9400 Series Helmets)
1
The clock displays the actual
time of day.
1 Info Control Button
2 12/24 Hour Cycle Button
3 Clock Set Button
4 Hour +/− Buttons
5 Minute +/− Buttons
6 Save Button
7 Exit Button
Clock Procedure
 Press Auto On/Off but-
ton to turn helmet On.
Helmet lens will darken
twice and then clear.
 Press Info button re-
peatedly until Clock is
displayed on screen.
 Press 12/24 button to
select either 12 or 24
hour clock format.
 Press the Set button to
enter set mode.
 Press Hour +/− buttons
to change hour setting.
 Press Minute +/− but-
tons to change minute
setting.
 Press Save button.
 Press the Exit button
when finished.
2
4 5 6 7
3