Miller Titanium Series - Section 2 − Specifications

OM-256 016 Page 4
SECTION 2 − SPECIFICATIONS
Specification Titanium 7300
Titanium 9400
Titanium 9400i
Titanium 1600
Titanium 1600i
Viewing Field 3.81 x 1.85 in
(97 x 47 mm)
3.81 x 2.62 in
(97 x 60mm)
3.86 x 3.54 in.
(98 x 90 mm)
Reaction Time 0.0000500 sec (1/20,000) −−
Available Shades
All Shades
Provide
Continuous
UV And IR
Protection.
Weld Mode
Darkened State: No. 8 − No. 13
Light State: No. 3
Cut Mode
Darkened State: No. 5 − No. 8
Light State: No. 3
Grind Mode
Light State: No. 3
X-Mode
Darkened State: No. 8 − No. 13
Light State: No. 3
Standard: No. 10
Upgradeable To Auto-
Darkening Lens
Sensitivity Control Adjustable For Varying
Ambient Light And
Welding Arc
−−
Delay Control Slows Lens Dark-To-Light State Between 0.1 And
1.0 Seconds
−−
Automatic Power
Off
Shuts Lens Off 45 Minutes After Last Arc Is Struck
−−
Low Battery Light Red Led Illuminates To Indicate 2−3 Days
Remaining Battery Life
−−
Power Supply CR2450 Lithium Battery
(Miller Part No. 217 043)
−−
Sensors Independent/Redundant
(Three)
Independent/Redundant
(Four)
−−
Operating
Temperature
14F to 131F / −10C to +55C
 When Stored In Extremely Cold Temperatures,
Warm Helmet To Ambient Temperature Before
Welding.
−−
Storage
Temperature
−4F to 158F / −20C to +70C
 When Stored In Extremely Cold Temperatures,
Warm Helmet To Ambient Temperature Before
Welding.
−−
Total Weight 19 oz (538.6 g) Titanium 9400:
18 oz (510.3 g)
Titanium 9400i:
26 oz (737 g)
Titanium 1600:
17 oz (481.9 g)
Titanium 1600i
22 oz (630 g)
Standards ANSI Z87.1+(2010) and
CSA
ANSI Z87.1+(2010) and
DIN/CSA/TUV
ANSI Z87.1+(2010)
And DIN/CSA/TUV
Warranty Three Years From Date Of Purchase (Section 12) 30 Day Limited