Millipore Labscale - Page 24

24 www.millipore.com
L = 20 cm (8 inches) (cut 2)
Fittings: 4 female (2 per length)
FEMALE
FEMALE
L
PUMP INLET
TUBING
PUMP INLET
PORT
PUMP OUTLET
TUBING
PUMP OUTLET
PORT
FEED IN
PORT
TANK OUTLET
VALVE
Figure 22: Install pump inlet and outlet tubing.
INSTALLATION TIP:
To reduce pump pulsation, increase tubing length.
100mm (4 in) of additional tubing will only increase
fill volume by 0.8 mL.
Note: Failure to place Sta-Pure (white) tubing at the pump
outlet may result in overpressurized tubing and bursting
of tubing.