MIMAKI JFX200-2513EX - Page 4

4
1
Remove the cover on the right side of the Y-bar.
• Remove the screws (2 places) and remove the cover.
2
Press the [MAINT.] key in LOCAL.
CARRIAGE OUT
[ENT]
3
Press the [ENTER] key.
MOVE POSITION
: STATION MAINT.
4
Press to select [HEAD MAINT.].
MOVE POSITION
: HEAD MAINT.
5
Press the [ENTER] key.
• Carriage moves to the left edge of the machine.