MIMAKI JV33-130BS - Page 150

4-32
4
Press the key.
5
Set the number of scans by pressing
the keys.
• Set value : 0 to 9990 times
• When the heater is set at high temperature (around 50 °C) or the ink amount is plenty due
to Double printing or the like, make 30 - 50 times is a standard.
6
Press the key.
7
Press the keys.
• The set display of TEMP difference is displayed.
8
Press the key.
9
Set the temperature difference by
pressing the keys.
• The ROUTINE WIPING function is activated when the setting temperature of the print
heater is higher than the ambient temperature and the difference is larger than the value of
“TEMP.difference”.
10
Press the key.
11
Press the key several times to end.
ROUT I NE WI P I NG
SCAN COUNT =
5 0
ROUT I NE WI P I NG
SCAN COUNT =
4 0
ROUT I NE WI P I NG
SCAN COUNT <e n t >
ROUT I NE WI P I NG
TEMP.di f ference<ent>
ROUT I NE WI P I NG
TEMP . D i f f e r ence=2
0 °C
ROUT I NE WI P I NG
TEMP . D i f f e r ence=2
0 °C
ROUT I NE WI P I NG
TEMP.di f ference<ent>