3-33
Machine settings
3
Convenient use
Change the operation condition of the room temperature
If you print in the status that the temperature of the place in which the machine has installed (room temper-
ature) is out of the usable temperature range, ink discharging defect or changing color may occur, and it
adversely affects the printing quality.
Here, select the operation if the room temperature is out of the usable temperature range when printing.
1
Press the key in the local
mode.
2
Select [MACHINE SETUP] by pressing
the keys.
3
Press the key.
4
Press keys to select [ROOM
TEMP.].
5
Press the key.
6
Press keys to select a set value.
Not wait ARR. : The error message is displayed for a moment, and printing starts.
Wait arrival : After the error message is displayed, wait until the ambient temperature
reaches the proper value. Then, printing starts.
7
Press the key.
• Press the key several times to end the setting.
• For the details of the usable temperature range, refer to P.6-3 “Available temp.”.
• If the room temperature is out of the usable temperature range at the start of printing, the error
message below is displayed to inform you of it.
**** ERROR 120 ****
ROOM TEMP LOW ( XX ° C )
**** ERROR 121 ****
ROOM TEMP H I GH ( XX ° C )
* The temperature displayed in error message is the one of inside of the machine. Be careful that it
is not actual room temperature.
To Next Page
Loading...
