4-24
Initial ink fill up
Perform the initial fill of ink by the following operations after [DISCHARGE & WASH].
1
Turn the power of the machine on.
• When the power is turned on, the firmware version
is displayed following [BOOT].
2
Select the ink type to be filled by press-
ing the keys.
• To check the state of the cartridge, press the
key. ( P.5-5)
3
Select the ink set (a filling color) to be
filled by pressing the keys.
• You cannot change the current ink set to other ink
set yourselves.
• If you want to change the ink set, contact sales
office of MIMAKI.
4
Press the key.
To Next Page
Loading...
