3-35
Machine settings
3
Convenient use
When using 600 cc cartridge for the first time
When the 600 cc cartridge is set in the slot of the ink station, the weight registration function of the eco case
automatically starts.
1
Measure the weight of the eco case.
• Measure the weight of the eco case only in advance.
• If the 600 cc ink pack is in the eco case, remove the 600 cc ink pack and then perform
measurement.
2
Set the 600 cc cartridge in the ink sta-
tion.
• Mount the 600 cc ink pack and the ink chip on the
eco case, and set it to the ink slot.
• The input screen for the weight of the eco case
will be displayed.
3
Pressing the keys
input the weight of the eco case.
• Press the keys to move to another digit.
• Press the keys to input the weight.
4
Press the key.
• For setting 600 cc cartridges in multiple slots, repeat the procedures in Step 2 and 3.
• After all registration is completed, the device will return to the status before the weight reg-
istration function was initiated.
To Next Page
Loading...
