1-7
Chapter 1 Before Use
1
2
2
2
2
*2 : Functions assigned to [FUNC1] to [FUNC3]
Contents of functions assigned to [FUNC1] to [FUNC3] are described below.
Icon Contents
Displays “MENU” for setting functions.
Displays maintenance functions such as test print, cleaning, etc.
Shifts to Remote from LOCAL and starts printing.
Executes data clear.
Suspends printing in Remote and shifts to LOCAL.
Lowers the table.
Raises the table.
When there are multiple items on the MENU screen or other screens, it moves to the next page.
When there are multiple items on the MENU screen or other screens, it moves to the previous page.
Used for completing confirmation when warning message has been displayed and so on.
Used for turning functions OFF or cancelling them, for example, when turning heater settings OFF and so on.
Some kind of setting or function is assigned. Operate according to the description of each function.
Switches between enable/disable when selecting multiple items, for example, when selecting target head for
cleaning and so on.
The vacuum fan is always ON.
Turns the vacuum fan on or off.
Sets the origin.
• The color of icons changes according to the state of the printer.
When the icon is green: The printer is in Remote mode.
When the icon is dark blue: The printer is in LOCAL mode.
TABLE-UP
VACUUM
ORIGIN SETUP
To Next Page
Loading...
