User Manual minCam360compact
®
®minCam GmbH, Bundesstraße 9, 87538 Fischen, Germany info@mincam.de
Version: March 2020, according to the technical state of the art at the time of publication, subject to alterations
Make sure that the hooks claw into the
apex of the opening.
Insert the retaining bridge and tighten
the star head screw. Push the
PUSH3000 backwards while doing so.
The PUSH3000 is ready to use.
Examples of application
The PUSH3000 is designed for the following inspection openings:
Figure 2.19: Inspection opening
DN110 in accordance
with DIN EN 145B
Figure 2.20: open pipe ends
To Next Page
Loading...