Mindray CAL 8000 - 10.2 Reexam Record

Data Managing Unit (DMU)
10-2
10.2 Reexam Record
A reexam record is a list of samples which have been used to make slides on the slide maker
& stainer. The record contains patient and parameter information for the operator to attain
information about the sample in a convenient way.
You can set to print the reexam record automatically or print manually at the review or report
screen of the DMU.
10.2.1 Print Setup
You can enable/disable the automatic record printing, and select the desired patient
information and parameters to be included in the reexamine record.
 Enable/Disable autoprint
Select “On”/”Off” to enable/disable the automatic record printing function.
 Set the threshold of items for auto print
Enter or click the arrows in the “Threshold of Items for Auto Print” field to define the threshold.
After the entry is saved and the autoprint function is enabled, when the number of samples
processed by the slide maker & stainer reaches this threshold, the system automatically
prints the reexam record of these samples.