Mindray CAL 8000 User Manual

Operating Your System
5-7
5.7 Inserting a STAT Sample
When a STAT sample needs to be analyzed immediately when the sample processing line is
working, you can either analyze it in open-vial using the STAT function of the analyzer, or
insert a new tube rack loaded with the STAT sample (see the steps below for details).
1.
Place the well prepared STAT sample tube (see the operator’s manual of the analyzer
for how to prepare samples) in a tube rack.
2.
Press the push key of the loading assembly (shown in the figure below), and the
loading assembly will push back the current tube rack at the forefront of the loading
tray.
3.
Put the tube rack with the STAT sample at the forefront of the loading tray, and the
system automatically transport it to the track module, and then to an analyzer.

Mindray CAL 8000 Specifications

General

Brand	Mindray
Model	CAL 8000
Category	Measuring Instruments
Language	English