Mindray CAL 8000 - Operating Your System

5-1
5 Operating Your System
5.1 Introduction
This chapter introduces the daily operating process of the CAL 8000 from startup to
shutdown.
A flow chart presenting the common daily operating process is shown below:
Start up the system
See 5.3 Startup
Run daily QC of the analyzer
See Operator’s Manual of the analyzer
Initial checks
See Chapter 4 Initial Checks
Sample Analysis
Auto analysis using the system Offline analysis
See 5.4 Starting analysis
See Operator’s Manual of the analyzer
Reviewing and Processing Sample Results
See chapter 7 Reviewing and Processing Sample Results
Shutdown the system
See 5.5 Finishing Analysis