Mindray CAL 8000 - B.11 Barcode Specifications

Specifications
B-3
Width (mm)
Height
(mm)
Depth (mm)
Weight (Kg)
CAL 8000 (without
pneumatic unit)
Varies with
specific
configurations
≤1470
≤1030
Varies with
specific
configurations
Pneumatic Unit
≤310
≤480
≤430
≤20
Nonterminal analyzer track
module
≤1190
≤880
≤1030
≤260
Nonterminal SM&S track
module
≤1350
≤880
≤1030
≤350
Terminal track module
≤1390
≤880
≤1030
≤350
Loading Module
≤350
≤970
≤1030
≤70
Unloading Module
≤340
≤970
≤1030
≤60
B.10 Contraindication
None
B.11 Barcode Specifications
The Sample Processing System can read barcodes that are stuck to the test tubes. The
sample ID read from the barcode will be stored and used as the only identification of the
sample.
The barcodes used shall meet the specifications stated in this section.
1. Supported barcode types
All code types and check digit supported by the system are listed as follows.
Barcodes Supported by the Sample Processing System
Code Type
Check Digit
Number of Digits
CODE128
Self-checking (check digit is
always included)
No more than 20 digits (sample ID)
CODE93
Self-checking (check digit is
always included)
No more than 20 digits (sample ID)
UPC/EAN
Self-checking (check digit is
always included)
Fixed length: 8 or 13 digits