Mindray CAL 8000 - Page 97

Troubleshooting
9-3
Multiple unloading failed
1. Power off the system and restart it after a while.
2. If the error still exists, Contact Mindray Customer
Service Department.
Loading mechanism
operating failed
1. Power off the system and restart it after a while.
2. If the error still exists, Contact Mindray Customer
Service Department.
Tube rack left in the direction
change position
1. Power off the system and restart it after a while.
2. If the error still exists, Contact Mindray Customer
Service Department.
Unloading mechanism
operating failed
1. Power off the system and restart it after a while.
2. If the error still exists, Contact Mindray Customer
Service Department.
Unloading assembly full
1. Power off the system and restart it after a while.
2. If the error still exists, Contact Mindray Customer
Service Department.
Unloading assembly receiving
failed
1. Power off the system and restart it after a while.
2. If the error still exists, Contact Mindray Customer
Service Department.
Loading direction change
mechanism moving to
scanning position failed
1. Power off the system and restart it after a while.
2. If the error still exists, Contact Mindray Customer
Service Department.
No tube rack detected when
loading direction change
motor moves to scanning
position
1. Power off the system and restart it after a while.
2. If the error still exists, Contact Mindray Customer
Service Department.
Tube rack direction changing
failed
1. Power off the system and restart it after a while.
2. If the error still exists, Contact Mindray Customer
Service Department.