4 - 40 Operator’s Manual
4 Setup
4.8.2 iStorage Preset
You can send exam data or images to the iStorage server and perform analysis using UltraAssist.
For details about this feature, see the UltraAssist manual.
Add an iStorage service
Perform the following procedure:
1. Set the iStorage server properties as described above.
2. Click [Connect] to verify connection.
3. Click [Add] to add the service to the Service list.
Edit a network service
Perform the following procedure:
1. Select the service to be updated in the service list.
2. You can see properties in the Configure Service area.
3. Do one of the following to edit the network service:
– Modify the properties and click [Update] to update the setting.
– Click [Default] to set as the default service.
– Click [Delete] to delete it from the service list.
4.8.3 MedTouch/MedSight Preset
You can set environment for MedTouch/MedSight here and then use the MedTouch/MedSight
function by mobile phone or tablet computers. See MedTouch/MedSight manual for details.
Item Description
Service Name The name of the iStorage service.
IP Address IP address of the iStorage service device.
Port Port for transmitting.
Charset Set the character set.
To Next Page
Loading...
Need help?
General
