Mindray ME7 User Manual

10 - 4 Operator’s Manual
10 Physiological Unit Signal
10.3.2 Linked Review of Waveforms, M/D Images and 2D
Images
If the physio unit signal, time curve and 2D image are frozen at the same time, the replay of them is
displayed at the same time.
10.4 Parameter Description
The physio parameters are described as follows:
Parameter Description
ECG Source Select ECG source.
Gain Set the amplitude of the trace.
Position Set the vertical position of the both traces on the image display.
Speed Change the speed of the physio trace.
T1 Set the delay time T1 in Single trigger or Dual trigger.
T2 Set the delay time T2.
Interval Set the time interval for Timer.
Invert Invert the display.

Mindray ME7 Specifications

General

Brand	Mindray
Model	ME7
Category	Diagnostic Equipment
Language	English