Mindray ME7 User Manual

4 Setup
Operator’s Manual 4 - 35
Print Service Preset
DICOM print preset items are described as follows:
Item Description
Device After you set the server (s) in DICOM Preset screen, the name (s) will
appear in the drop-down list, select the name of the print server.
Service Name Default is xxx-Print, user-changeable.
AE Title Application Entity title, here, it should be consistent with that of the
print server.
Port DICOM communication port, 104 is default. Here, the port should be
consistent with that of the print server port.
Maximum Retries It starts retrying if it fails to send DICOM task to the server. The retry
entry times should be this value.
Interval Time (s) Reserved time.
Timeout Refers to the amount of time after which the system will stop trying to
establish a connection to the service.
TLS Transport Layer Security. Select whether to encrypt the data during
network transportation.
Copies Refer to copies of printed files. You can select among 1 through 5, or
directly enter the numeral.
Settings The system supports RGB (color printing) and MONOCHROME2
(black and white printing). Please select the type the printer supports.
Film Orientation Select between LANDSCAPE and PORTRAIT.
Priority Specify printing task priority among HIGH, MED and LOW.
Film Size Select film size among the selections listed in the drop-down list.
Display Format Specify quantity of printed files, e.g. STANDARD\2, 3 indicates 6
images are printed for each page.
Medium Type Specify print medium: Paper, Clear Film, Blue Film; select Blue Film
or Clear Film for black and white printing; select Paper for color
printing.
Trim Specify whether you want a trim box to be printed around each image
on the film: Yes or No.
Configuration Info Enter configuration information in the field.
Min Density Enter the minimum density of the film.
Max Density Enter the maximum density of the film.
Destination Specify where the file is exposed: MAGAZINE (stored in the
magazine), or, PROCESSOR (exposed in the processor).
Magnification Type Select how the printer magnifies an image to fit the film.
• Replicate: interpolated pixels belong to duplicate of adjacent pixels);
• Bilinear: interpolated pixels are generated from bilinear
interpolations between adjacent pixels;
• Cubic: interpolated pixels are generated from cubic interpolations
between adjacent pixels;
• None: without interpolation.

Mindray ME7 Specifications

General

Brand	Mindray
Model	ME7
Category	Diagnostic Equipment
Language	English