B - 4 Operator’s Manual
B Trolley and Accessories
No. Item Description
1. Main unit tray Used for placing and fixing the main unit. You can remove
the tray and install the U-Bank (purchased separately)
instead.
NOTE:
Keep the main unit tray carefully for future use after it
is removed from the trolley. Reinstall the main unit tray
to the trolley if the U-Bank has been removed from the
trolley.
2. Probe holder Used for placing probes temporarily.
3. Trolley handle Used for moving the trolley.
4. Tray release lever (located
on the bottom of the handle)
Used for removing the main unit tray.
5. Cable hook Manage cables.
6. Storage box Used for placing report or other stuff.
7. Caster Used for securing or moving the system.
8. Printer bracket Used for placing the printer.
9. Probe extension module Used for extend ports for connecting probes (optional).
10. Protective handle Used for moving the trolley and protecting the trolley from
crash during moving.
11. Anti-theft lock Used for releasing the main unit from the trolley.
To Next Page
Loading...
Need help?
General
