Mindray ME8 Operator's Manual

4 Setup
Operator’s Manual 4 - 3
EXAM SETUP Status after exam
ends
To set the system status when an exam ends.
Auto Screenshot of
Report Page by
Page
After selected, perform measure application and save
single frame image, then end the patient exam, the
system will save the report image in iStation.
Sending/printing
after End Exam
Select whether to automatically archive the exam data
to the DICOM server for storage/print.
Send SR after End
Exam
Select whether to automatically send structure report to
the DICOM server.
Maximum number
of exams to be kept
To set the maximum number of exams to be kept. If the
actual number is larger than the preset number, the
latest exam will replace the earliest exam.
NOTE:
The patient exams which exceed the preset
maximum will be deleted and unrecoverable, it is
recommended to perform patient data backup before
enabling this function to avoid data loss.
SCREEN SAVER ScreenSaver Select the different saver methods to the system.
After enabling the screen saver, check “Select Picture-
Mindray” to select the image from the system. Or click
[Review] to select the image on your own; you can set
the interval time for the screen saver slideshow in the
drop-down list beside “Interval”.
To set the waiting time before the system enters
dormancy status in the drop-down list beside “Wait”.
The system enters screen saver automatically if the
system waiting time exceeds the screen saver already
set.
Standby The system enters screen saver automatically if the
system waiting time exceeds the screen saver already
set and standby time.
CoverOff-Standby After folding down the monitor, the system enters
standby mode automatically if the waiting time exceeds
the CoverOff-Standby time.
DISPLAY Brightness auto
adjustment
To set the brightness/contrast of the main screen and the
touch screen according to the conditions.
LCD To set the brightness and the contrast of the main
screen, or restore to the default.
TouchPanel After selection, the system restores the touch screen
settings back to factory.
IVOCAL Automatically shut
down waiting time.
To set the delay before voice recording stops
automatically.
Enable Voice
Response
After it is ticked, the system will repeat recorded voice
commands automatically.
Type Item Description

Mindray ME8 Specifications

General

Brand	Mindray
Model	ME8
Category	Diagnostic Equipment
Language	English