5-30  Image Optimization 
5.8.2  Exit Color M Mode 
Press <C> or <M> on the control panel to exit Color M mode. 
Or, press <B> on the control panel to return to B mode. 
5.8.3  Image Parameters 
In Color Flow M mode, parameters that can be adjusted are in accordance with those in B, M and Color 
modes; please refer to relevant sections of B, Color and M mode for details. 
In color tissue M mode, parameters that can be adjusted are in accordance with those in B, M and 
Color modes; please refer to relevant sections of B, Color and M mode for details. 
ROI Adjustment 
The ROI size and position determine the size and position of the color flow or color tissue displayed in 
the color M mode image. 
  Set the position of the sampling line by moving the trackball left and right. Press <Set> to 
switch the cursor status between the ROI position adjustment and ROI size adjustment. 
5.9  Free Xros M Mode 
Free Xros M mode analyzes the arbitrary part and direction of 2D image to obtain cardiac movements 
in a period of time, which can be fulfilled via the comparison of various sampling lines, thus to complete 
the estimate of the tissue accurately. The system supports Free Xros M (including linear anatomical M 
and curved anatomical M) scan for B mode, color mode, power mode and TVI mode.   
Free Xros M mode is optional.   
 
CAUTION: 
Free Xros M in the operator’s manual that it is provided for reference, not for 
confirming a diagnosis. Generally it should be compared with other device or 
make a diagnosis by non-ultrasonic methods. 
User-defined key for Free Xros M mode 
Assign a user-defined key for Free Xros M via: [Setup][System Preset] 
[iConsole&Footswitch]/[Key Board].   
5.9.1  Linear Anatomical M (Free Xros M) 
1.  Adjust the probe and image to obtain the desired plane in real-time B mode or M mode. 
Or select the B mode cine file to be observed. 
2.  Tap [Free Xros M] on the touch screen to enter Free Xros M mode or press the user-defined key to 
enter Free Xros M mode. 
3.  Adjust the sampling line (single line or couple of lines) to obtain optimized images and necessary 
information. 
Free Xros M imaging is supported on frozen B image, B+M image and B+Power/Color/TVI image.