5-56 Image Optimization
Rocked scanning
Rotate the probe once from the left to the right side (or from the right to the left) to include the
entire desired region. See the figure.
5.11.6.4 Smart 3D Image Viewing
In VR viewing, the system supports the following functions:
Render setting.
B-mode parameter adjustment.
Setting the display format.
Viewing MPR.
Image zooming.
Rotation.
Image editing.
VR parameter adjustment.
Scanning distance or angle
Scanning plane and probe movement
Move the probe across the body surface.
The arrow in the figure below indicates the movement of the probe (you can move the probe in the
opposite direction to the arrow.)
5.11.6.5 Image Saving and Reviewing in Smart 3D
Image saving
In 3D viewing mode, press the single image Save key (Save Image to hard drive) to save the
current image to the patient information management system in the set format and image size.
Save clip: in 3D viewing mode, press the user-defined Save key (Save Clip (Retrospective) to
hard drive) to save a CIN-format clip to the hard drive.
To Next Page
Loading...
