Mindray Resona I9W - Page 134

5-60 Image Optimization
b) After parameter settings, tap [Exit XXX] to exit the lighting mode settings.
c) Tap [Refresh] to refresh the thumbnails on the iLive settings interface.
3. Tap [Return] to apply the selected lighting mode.
Operation Controls for Lighting Mode Settings
Parameter Description
VL Saturation Adjust the saturation for light 1/2/3.
VL Hue Adjust the color for light 1/2/3.
VL Distance
Adjust the distance for light 1/2/3 when the light source is set to
torch or point.
The larger the distance, the more the illuminated part on the
surrounding area of the image; vice versa.
VL Angle
Adjust the angle for light 1/2/3 when the light source is set to
torch.
The larger the angle, the larger the scope of light beam, and the
larger the illuminated area; vice versa.
Reset Classic/
IntPoint/
ExtPoint/
Parallel/ Torch/
3-Light/ User 1/
User 2
Reset the lighting mode to the original status.
Copy to
Copy the lighting mode to customized lighting mode “User 1” or
“User 2”
Other Operations
Zoom
Same as in 3D/4D mode.
Rotation
Roll the trackball to view sectional images as necessary. Rotate <M>, <PW>, <C> to perform axial
rotation or rotate the <4D> knob to adjust the nearest VOI section (cut plane) position.
Comments and Body Marks
Same as in other modes.
5.11.9 3D Layout
The function compiles the 3 MPRs together according to their relative positions, to provide a much
clearer interior anatomical structure.
This function is provided by the [Niche] option, and does not support Smart 3D image data.
Niche
1. Select the [Tool][3D Layout] tab on the touch screen, then tap [Niche].
2. Tap [A]/[B]/[C]/[Niche] on the touch screen to select the reference plane as Plane A, Plane B, Plane
C or Niche.
3. Set the view direction for niche display mode using the touch screen: from the front of the reference
image or from the back.
4. Roll the trackball to view sectional images as necessary. Rotate <M>, <PW>, <C> to perform axial
rotation or rotate the <4D> knob to adjust the nearest VOI section (cut plane) position.