Mindray Resona I9W - Page 140

5-66 Image Optimization
Select the proper image layout and space according to the size of the target structure.
To observe the details or the tiny part of the interested region, do image zooming please.
7. Rotate the 3D image to observe the slices of other orientations. Repeat step 6 if necessary.
 If the target orientation and region cannot be observed even after image rotation, tap [Reset
Ori.] to reset the 3D image.
8. Do operations like comment to the interested region.
9. Save images as necessary.
iPage+SCV operation
Adjust the parameter [Thickness] in iPage
+
screen when SCV imaging is needed.
5.11.12.2 Basic Screen & Operation
<1> A plane (the current
reference image)
<2> B plane <3> C plane
<4>
Central slice line(Current
active slice)
<5> Slice line <6>
Space between two slice
lines
<7> Y-axis <8> X-axis <9>
Slice position (to the central
slice)
<10>
Slice order number
<11>
Central slice
mark
<12>
Active slice be highlighted in
green
 Layout
The system supports several types of displaying layout: 2*2, 3*3, 4*4 and 5*5, touch the
corresponding icon on the touch screen to select, and the selection [Slice Number] changes
accordingly.
 Reference image
Tap [A], [B], or [C] to select the reference image.
<2>
<1>
<3>
<4>
<5>
<6>
<7>
<8>
<9>
<10>
<11>
<12>