10-20 Patient Data Management
3. Enter the user name and password, confirm password, and select or deselect the check box from
the privilege list. Users can only access the function module with assigned privilege.
4. Click [OK] to confirm the setting and exit the dialog box. The new user and the privilege will appear in
the User List.
Deleting a User
Turn on the access control function and log in to the system as Administrator before you delete the
user.
1. Open the “Access Control” page using the path: [Setup] → [System] → [Access Control].
2. Select the user to be deleted in the User List. Click [Delete] to delete the selected user.
Editing privilege
Turn on the access control function and log in to the system as Administrator before you edit privileges.
1. Open the “Access Control” page using the path: [Setup] → [System] → [Access Control].
2. Select a user, click [Edit Privilege] to enter the "Edit user privilege" dialog box, and select or
deselect the check box from the privilege list.
3. Click [OK] to confirm the editing and exit the dialog box. The edited privileges will appear in the
User List.
Modify Passwords
The system administrator can modify all user passwords. The administrator password is empty by
factory default. You can set this password.
An operator can only modify his/her own password. There are two ways to modify passwords: on the
“Access Control” page or in the “Session Manage” dialog box.
“Access Control” page (administrators can modify the password)
1. Open the “Access Control” page using the path: [Setup] → [System] → [Access Control”].
2. Select the user name to be modified in User List. Click [Change Password] to open the dialog box.
To Next Page
Loading...
