11-4 DICOM/HL7
DICOM storage preset items are described as follows:
Configure
New Service
Device
After you set the server (s) in DICOM Preset screen, the name
(s) will appear in the drop-down list, select the name of the
storage server.
Service Name Default is xxx-Storage, user-changeable.
AE Title
Application Entity title, here, it should be consistent with that of
the storage server.
Port
DICOM communication port, 104 is default. Here, the port
should be consistent with that of the storage server port.
Maximum Retries
Set the maximum retries (0-9). The default value is 3. If the
DICOM task sending to the server fails, the retry times should
be 3.
Interval Time(s) Interval time.
Timeout
Refers to the amount of time after which the system will stop
trying to establish a connection to the service.
TLS
Transport Layer Security. Select whether to encrypt the data
during network transportation.
Cine Zoom Mode Select the cine zoom mode during image file storage.
Compression Mode
Select the compression mode: original data (uncompressed),
RLE (the image not compressed), JPEG, and JPEG2000.
Compression Ratio
Select the JPEG compression ratio: lossless, low, medium,
and high.
The compression ratio is inversely proportional to the image
quality (reserved function).
To Next Page
Loading...
