Mindray Resona I9W - Page 307

Setup 12-5
Type
Item
Description
B+Color Refresh with
PW/CW Sampling
Line Movement
To set whether to turn on the function that when moving
PW/CW sampling line, B+Color image is activated under
B+Color+PW/CW mode.
Uninterruptible image
saving when
preprocessing
parameters are
changed
Adjusting preprocessing parameters will not interrupt
image/cine saving.
Color And PW/CW
Synchronize Invert
To set whether to synchronize the invert status of PW/CW
mode with that of Color mode.
Display Transducer
SN
To set whether to display the transducer SN in the imaging
screen.
B+Color+PW
Unfreeze keeping PW
To set whether to retain PW images when unfrozen under
B+Color+PW mode.
FreeHand
Cine Length
Time(s) To set the freehand cine storage length.
Fusion
imaging
Power line frequency Select the power frequency.
Tissue
Tracking
QA
Segment model Set the cardiac segment model: 16 or 17.
Image
Parameter
Display
/
To select the parameters under each mode to be displayed
in the real-time imaging screen
ZoneVue ZoneVue
To set whether to display “ZoneVue” parameter in the
parameter adjusting area.
12.1.4 Application
Open the page via [Setup]  [System]  [Application].
Type Item Description
Comment
Clear comments
while unfreezing
image or changing
probe/exam
To set whether to clear comments after unfreezing image
or changing probe or exam.
Clear bodymark upon
unfreeze
To set whether to clear body marks after unfreezing image.
Voice comment
enabled
To set whether to enable voice comment feature.
Intelligent
Input
Input Method
Association
To set whether to enable intelligent input method.
Preview
Thumbnail
Image
Preview Thumbnail
Image
To set whether to magnify the thumbnail image when the
cursor is within the scope of the thumbnail image.
On this page, you can also set the measurement ruler and relevant information. For details, see the
Operator’s Manual [Advanced Volume].