Probes and Biopsy 13-43
NGB-034
Separation of the needle in the operation
1. Pull the lock pin out until the V-shaped cover can be turned and opened up.
2. Turn over the V-shaped cover to expose the needle. Remove the probe and bracket.
Removing the needle-guided bracket
Screw the pinch nut to release the needle-guided bracket.
NGB-024
1. Hold the transducer. Press the biopsy needle to separate the needle from pressure position of the
needle.
2. Separate the bracket and the transducer from the needle.
To Next Page
Loading...
